“Xterra, Xterra Read All About It”…

Posted: April 25, 2012 in Geared Encounters
Tags: , , , ,

Hello boys and girls, welcome to pattern-failure corner. This round it’s time to cover one of the most popular roof-racked, top-heavy rolling toasters prevalent in the used car market. You guessed it, I’m talking about the Nissan Xterra of vintage 2001-2004. These babies exploded onto the market back in their day most commonly equipped with a 3.3L V6 engine. Their collective gear ratios provided a vehicle ideal for grocery fetching house-spouses and teenagers alike in that they both are well served with an underpowered, oversized rig with plenty of crumple room to protect the occupants. Don’t get me wrong, overall I like these vehicles for my customers. They have fewer common failures, are reasonable on maintenance and seem to be a pretty good buy from the standpoint of total ownership cost over the life of the vehicle and likewise a safe 100,000 mile used buy for the kiddo.
For my taste, however, this rig falls short. It still escapes me that the designers of these rigs chose the geared ratios that barely moved these rigs up any hill without downshifting into a near-redline vibrating engine roar that is loud enough to just make me uneasy. Like a nervous astronaut riding the rocket as it tries to escape earth’s atmosphere. But wait… it’s not the Challenger, Columbia, or Enterprise and we’re not headed for the moon… Its just an Xterra fighting with every ounce of guts to ascend the I-70 corridor. Personally, I just don’t want to feel like I’m taxing my rig out at 98% capacity when climbing the last mile up to Eisenhower tunnel.
Not so fast though… It’s not fair to single out this specific make and model as a slug. Equally power-band challenged are Toyota’s 3.0L, and 3.4L equipped Tacomas and 4Runners made over the span of nearly a decade and a half. What makes the Xterra stand out from my perspective is its physique, reminiscent of the late-eighties, early nineties Isuzu troopers. Tall, narrow, and toaster like yet ever popular as a top seller in its time. Additionally etched into my perspective are the pattern failures that we have been seeing on these ever-popular vehicles. Namely burnt electrical component at the fuel tank and paper thin aluminum walls bursting and purging antifreeze from the engine.
Rest on your rump, your ride is as dead as a stump, and its all because of your hot-headed pump.

If you own a Chrysler, Chevy, or Ford, you may have already become intimately familiar with the perils of a dying fuel pump. Nissan in general however is not as common to see pump failures. As many motor driven pumps do in their death spiral excessive current draw taxes circuits and expedites deteriorating connections to the point of metal turned to ash and a tow bill for the record pouch. Check out this particular pattern failure. You can see in the picture this common path of greatest weakness where the fuel pump circuit seems to burn through the metal and plastic in this top-cap that seals the gas tank. Don’t fret, the circuit is still safe as the fuse protects from developing enough heat to create an ignition. However, over time this seems to happen to nearly all Xterras right around 110,000 miles.

Remember what happened to the wicked witch of the west when she was splashed with water? Well recently I have begun wondering if it was 80,000 mile old engine water that they used, and please don’t get any on me! As acids are known to attack metals such as aluminum, acidic coolant degraded over time in the Xterra engine erode the walls of cast aluminum water jackets on their engines until their paper thin walls burst into leaks and overheats. Because of this prevalence, and the coincidence of their mileage-timing, we have been recommending replacement of these bolt-on aluminum parts with timing belt jobs so that the timing belt doesn’t have to be disassembled shortly after to replace these repeated offenders. It’s a differentiator that only experience provides. Just like an oil pump seal on a 2.5L Subaru, if these aren’t recommended with a timing belt job then your guy doesn’t have the experience to warrant you trust. Most of these failures have very subtle signs that are difficult to see when assembled yet become obvious once torn apart. Rather than getting a call once your rig is torn apart, you should be prepped in advance.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s